VGCFGRESTORE
Section: Maintenance Commands (8)
Updated: LVM TOOLS 2.03.16(2) (2022-05-18)
Index
Return to Main Contents
NAME
vgcfgrestore --- Restore volume group configuration
SYNOPSIS
vgcfgrestore option_args position_args
[ option_args ]
[ position_args ]
--commandprofile String
--config String
-d|--debug
--devices PV
--devicesfile String
--driverloaded y|n
-f|--file String
--force
-h|--help
--journal String
-l|--list
--lockopt String
--longhelp
-M|--metadatatype lvm2
--nohints
--nolocking
--profile String
-q|--quiet
-t|--test
-v|--verbose
--version
-y|--yes
DESCRIPTION
vgcfgrestore restores the metadata of a VG from a text back up file
produced by vgcfgbackup. This writes VG metadata onto the devices
specifed in back up file.
A back up file can be specified with --file. If no backup file is
specified, the most recent one is used. Use --list for a list of
the available back up and archive files of a VG.
WARNING: When a VG contains thin pools, changes to thin metadata cannot be
reverted, and data loss may occur if thin metadata has changed. The force
option is required to restore in this case.
USAGE
Restore VG metadata from last backup.
vgcfgrestore VG
-
[ COMMON_OPTIONS ]
---
Restore VG metadata from specified file.
vgcfgrestore -f|--file String VG
-
[ COMMON_OPTIONS ]
---
List all VG metadata backups.
vgcfgrestore -l|--list VG
-
[ COMMON_OPTIONS ]
---
List one VG metadata backup file.
vgcfgrestore -l|--list -f|--file String
-
[ COMMON_OPTIONS ]
-
[ VG ]
---
Common options for command:
-
[ -M|--metadatatype lvm2 ]
[ --force ]
Common options for lvm:
-
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
-
--commandprofile String
-
- The command profile to use for command configuration.
See lvm.conf(5) for more information about profiles.
-
--config String
-
- Config settings for the command. These override lvm.conf(5) settings.
The String arg uses the same format as lvm.conf(5),
or may use section/field syntax.
See lvm.conf(5) for more information about config.
-
-d|--debug ...
-
- Set debug level. Repeat from 1 to 6 times to increase the detail of
messages sent to the log file and/or syslog (if configured).
-
--devices PV
-
- Restricts the devices that are visible and accessible to the command.
Devices not listed will appear to be missing. This option can be
repeated, or accepts a comma separated list of devices. This overrides
the devices file.
-
--devicesfile String
-
- A file listing devices that LVM should use.
The file must exist in /etc/lvm/devices/ and is managed
with the lvmdevices(8) command.
This overrides the lvm.conf(5) devices/devicesfile and
devices/use_devicesfile settings.
-
--driverloaded y|n
-
- If set to no, the command will not attempt to use device-mapper.
For testing and debugging.
-
-f|--file String
-
- Read metadata backup from the named file.
Usually this file was created by vgcfgbackup.
-
--force ...
-
- Force metadata restore even with thin pool LVs.
Use with extreme caution. Most changes to thin metadata
cannot be reverted.
You may lose data if you restore metadata that does not match the
thin pool kernel metadata precisely.
-
-h|--help
-
- Display help text.
-
--journal String
-
- Record information in the systemd journal.
This information is in addition to information
enabled by the lvm.conf log/journal setting.
command: record information about the command.
output: record the default command output.
debug: record full command debugging.
-
-l|--list
-
- List metadata backup and archive files pertaining to the VG.
May be used with --file. Does not restore the VG.
-
--lockopt String
-
- Used to pass options for special cases to lvmlockd.
See lvmlockd(8) for more information.
-
--longhelp
-
- Display long help text.
-
-M|--metadatatype lvm2
-
- Specifies the type of on-disk metadata to use.
lvm2 (or just 2) is the current, standard format.
lvm1 (or just 1) is no longer used.
-
--nohints
-
- Do not use the hints file to locate devices for PVs. A command may read
more devices to find PVs when hints are not used. The command will still
perform standard hint file invalidation where appropriate.
-
--nolocking
-
- Disable locking. Use with caution, concurrent commands may produce
incorrect results.
-
--profile String
-
- An alias for --commandprofile or --metadataprofile, depending
on the command.
-
-q|--quiet ...
-
- Suppress output and log messages. Overrides --debug and --verbose.
Repeat once to also suppress any prompts with answer 'no'.
-
-t|--test
-
- Run in test mode. Commands will not update metadata.
This is implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to unusual
error messages in multi-stage operations if a tool relies on reading
back metadata it believes has changed but hasn't.
-
-v|--verbose ...
-
- Set verbose level. Repeat from 1 to 4 times to increase the detail
of messages sent to stdout and stderr.
-
--version
-
- Display version information.
-
-y|--yes
-
- Do not prompt for confirmation interactively but always assume the
answer yes. Use with extreme caution.
(For automatic no, see -qq.)
VARIABLES
- VG
-
Volume Group name. See lvm(8) for valid names.
- String
-
See the option description for information about the string content.
- Size[UNIT]
-
Size is an input number that accepts an optional unit.
Input units are always treated as base two values, regardless of
capitalization, e.g. 'k' and 'K' both refer to 1024.
The default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units:
b|B
is bytes,
s|S
is sectors of 512 bytes,
k|K
is KiB,
m|M
is MiB,
g|G
is GiB,
t|T
is TiB,
p|P
is PiB,
e|E
is EiB.
(This should not be confused with the output control --units, where
capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
NOTES
To replace PVs, vgdisplay --partial --verbose will show the
UUIDs and sizes of any PVs that are no longer present. If a PV in the VG
is lost and you wish to substitute another of the same size, use
pvcreate --restorefile filename --uuid uuid (plus additional
arguments as appropriate) to initialise it with the same UUID as the
missing PV. Repeat for all other missing PVs in the VG. Then use
vgcfgrestore --file filename to restore the VG's metadata.
SEE ALSO
lvm(8),
lvm.conf(5),
lvmconfig(8),
lvmdevices(8),
pvchange(8),
pvck(8),
pvcreate(8),
pvdisplay(8),
pvmove(8),
pvremove(8),
pvresize(8),
pvs(8),
pvscan(8),
vgcfgbackup(8),
vgcfgrestore(8),
vgchange(8),
vgck(8),
vgcreate(8),
vgconvert(8),
vgdisplay(8),
vgexport(8),
vgextend(8),
vgimport(8),
vgimportclone(8),
vgimportdevices(8),
vgmerge(8),
vgmknodes(8),
vgreduce(8),
vgremove(8),
vgrename(8),
vgs(8),
vgscan(8),
vgsplit(8),
lvcreate(8),
lvchange(8),
lvconvert(8),
lvdisplay(8),
lvextend(8),
lvreduce(8),
lvremove(8),
lvrename(8),
lvresize(8),
lvs(8),
lvscan(8),
lvm-fullreport(8),
lvm-lvpoll(8),
blkdeactivate(8),
lvmdump(8),
dmeventd(8),
lvmpolld(8),
lvmlockd(8),
lvmlockctl(8),
cmirrord(8),
lvmdbusd(8),
fsadm(8),
lvmsystemid(7),
lvmreport(7),
lvmraid(7),
lvmthin(7),
lvmcache(7)
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- USAGE
-
- OPTIONS
-
- VARIABLES
-
- ENVIRONMENT VARIABLES
-
- NOTES
-
- SEE ALSO
-
This document was created by
man2html,
using the manual pages.
Time: 18:08:24 GMT, May 18, 2024